The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system. This passive DI features two independent channels with separate inputs and thru-puts for the artist's stage amp and two fully isolated outputs for the PA system.

At the heart of the design are two high-performance Eclipse ET-DB2 transformers. These deliver 20 Hz to 20 kHz performance with less than 1.5 dB deviation above 18 kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter, which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers, and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops.

As with all Radial products, the ProD2 is built tough to handle the rigors of professional touring. A 14-gauge steel ultra-rigid I-beam skeleton frame eliminates the opportunity for outside stress to flex the sensitive PC board and cause premature solder joint failure. The innovative bookend design creates a protective zone around the connectors and switches, further increasing lifespan. And a full bottom no-slip pad adds mechanical isolation and electrical insulation to further reduce the opportunity for noise.

The Radial ProD2's warm sound, legendary build quality, and compact design have made it the most popular stereo direct box made today.