Air-Powered Series speaker stands from Ultimate Support represent everything all other speaker stands aspire to be. They're incredibly strong, extraordinarily sturdy, lightweight, 100% field serviceable, AND raise and lower speaker stands on their own! Driven by innovation and years of research and development, the Air-Powered Series features an internal shock that lifts speakers weighing 50 lbs and less with no effort and requires just one hand's worth of effort to raise speakers weighing more than 50 lbs! The TS-110BL also offers additional height plus a leveling leg that allows the speaker stand to stay level on risers, stairs, and other uneven surfaces.

Raise and Lower the Speaker with Ease!
The TS-100BL is the easiest speaker stand to use thanks to the internal air-powered shock that literally raises the speaker for you. The stand's internal shock easily raises speakers weighing 50 lbs and less with no effort from the user (the Mackie SRM Series, JBL EON Series, and QSC K Series all weigh far less than 50 lbs, for instance). And the TS-100BL requires very little effort from the end user to raise speakers weighing more than 50 lbs. When you're ready to lower the speaker, we've provided a convenient and ergonomic handgrip from which you can lower the speaker—with just one hand. There's never been an easier, more convenient, or safer way to set up and tear down speakers.

Leveling the leg? Included!
Have you ever run into a situation when you wished you could place a speaker where a set of stairs, risers, or a short ledge was in the way? The TS-110BL includes one leveling leg that telescopes down an additional 13" beyond the length of the other two tripod legs—allowing you to place the TS-110BL on a set of stairs, risers, a hillside, etc.

Extra Height
The original TS-100BL is plenty tall enough for most normal situations. However, when you need to get your speaker, lighting tree, light truss, or whatever, up a little higher, the TS-110BL is the perfect stand for you! The TS-110BL adds about 26 inches of additional height and has a maximum height of 9' 2"!

Patented Tripod Design
The TS-100BL's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all-plastic designs.

Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-100BL will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-100BL is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-100BL, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!