Expertly tested refurbished and open box products
Backed by the BYFP satisfaction guarantee

Free Shipping

Professionally Inspected

Satisfaction Guaranteed

Expert Support
DESCRIPTION
The SLXD4QDAN+ Quad Channel Receiver with Dante Audio connectivity is the best choice for streamlining SLX-D digital wireless performance into a space-saving footprint. Featuring expanded capabilities for confident speech presentation and vocal performance—from lecture halls to live entertainment.
FEATURES
-
• Four channels in one rack space
• Wide 138 MHz tuning range
• 32 available channels per frequency band (region dependent)
• Transparent 24-bit digital audio
• 118 dB dynamic range
• Audio Summing matches receiver output to available mixer channels (4, 3, 2 or 1)
• 4 XLR and 4 1/4" outputs and 2 local ethernet connections
• Dante Audio Networking, carried on single Ethernet cable
• RF Cascade creates an 8-channel system by linking two SLXD4Q+ together; no other accessories required
• Bias Voltage power supply management
• Digital predictive switching diversity
• Easy pairing of transmitters and receivers over IR scan and sync
• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
• Rugged metal construction
SPECIFICATIONS
-
• Dimensions (H x W x D): 42 x 393 x 152 mm (1.65 x 15.47 x 5.98 in.)
• Weight: 1750 g, without antennas
• Housing: Galvanized Steel
• Power Requirements: 15 V @ 1.03 A with Dante
• RF Input Spurious Rejection: >75 dB, typical
• RF Input Connector Type: BNC
• RF Input Impedance: 50 Ω
• RF Input Bias Voltage: 15 V DC, 150 mA maximum, per antenna (switchable on-off)
• Audio Output Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
• Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps
• Audio Output Configuration: 1/4" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground), XLR: Balanced (1 = ground, 2 = audio +, 3 = audio -)
• Audio Output Impedance: 1/4" (6.35 mm): 1.1 kΩ (550 Ω Unbalanced), XLR (line): 500 Ω (250 Ω Unbalanced), XLR (mic): 150 Ω
• Full Scale Output: 1/4" (6.35 mm): +12 dBV Unbalanced, +18 dBV Balanced, XLR: LINE setting = +18 dBV, MIC setting = -12 dBV
• Audio Output Mic/Line Switch: 30 dB pad
• Audio Output Phantom Power Protection: 1/4" (6.35 mm): Yes, XLR: Yes
• Cascade Output Connector Type: BNC
*Note: For connection of one additional receiver in the same band
• Cascade Output Configuration: Unbalanced
• Cascade Output Impedance: 50 Ω
• Cascade Output Insertion Gain: 0–2 dB, typical
• Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Cable Length: 100 m (328 ft)
CONTENTS
-
(1) Shure SLXD4QDAN+G57 Quad Receiver with Dante Wireless Receiver
(1) Rack Mounting Hardware
(2) Brackets
(2) 1/4 Wave Antennas
(1) Shure PS60 Power Supply
(1) Ethernet Cable
Sign up for our newsletter
Sign up for our mailing list to receive new product alerts, special offers, and coupon codes.
© 2026 avBYFP | Powered by Shopify