This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
ELEMENT
Externally polarized (DC bias) capacitor
POLAR PATTERN
Hyperardioid
FREQUENCY RESPONSE
20-20,000 Hz
LOW FREQUENCY ROLL-OFF
80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY
-34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE
50 ohms
MAXIMUM INPUT SOUND LEVEL
145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
NOISE
16 dB SPL
DYNAMIC RANGE (TYPICAL)
129 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO
78 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS
48V DC, 4.8 mA typical
SWITCH
Flat, roll-off; 10 dB pad (nominal)
WEIGHT
127 g (4.5 oz)
DIMENSIONS
155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter
OUTPUT CONNECTOR
Integral 3-pin XLRM-type
OPTIONAL INTERCHANGEABLE ELEMENTS
AT4049b-EL (cardioid); AT4053b-EL (hypercardioid)
ACCESSORIES FURNISHED
AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE
S1
(1) AT4051b Microphone (1) AT8405a stand clamp for 5/8"-27 threaded stands (1) Windscreen (1) Protective Carrying Case
Related products
Sign up for our newsletter
Sign up for our mailing list to receive new product alerts, special offers, and coupon codes.
