Don't miss out on exclusive offers, updates and insider deals. Join our newsletter and unlock a 15% discount off your first purchase
The Clear-com FSII-BP19-X4-US offers unparalleled wireless communication solutions, ideal for professional broadcast, live event production, and immersive theater environments. This robust beltpack system combines reliability with flexibility, featuring intuitive controls and a compact design for comfortable wearability. With its advanced frequency hopping spread spectrum technology, it ensures interference-free communication even in crowded RF environments. The FSII-BP19-X4-US facilitates seamless coordination among teams with its crystal-clear audio quality and up to 18 hours of battery life. Whether used in large-scale productions or intimate settings, this Clear-com beltpack sets the standard for efficient and dependable wireless communication.
Features
• Functions with FreeSpeak BASE-II, FreeSpeak Edge Base, Arcadia Central Station and Eclipse HX via E-IPA cards
• 1.9, 2.4 and 5.0 GHz beltpacks operate on a single system
• Supports up to 200 beltpacks on a single system (see Capacity Chart for details)
• Encoder Volume Swap between A&C and B&D
“Listen Again” message replay
• Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
• Over-the-air beltpack registration
• 1.9 GHz radio frequency
• Typical range 300ft (90m), outdoor range 800ft (240m)
• Robust radio link works in high multipath or reflective environments
• FSII 1.9 beltpacks supports Bluetooth headset connection up to version 5.1
• IP53 rating for wet and dusty conditions
• 18+ hour battery life or USB port for continuous operation
Specifications
Audio Bandwidth: 200Hz-7.5KHz
No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume
Mode of Operation: Full duplex on all routes
Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls
Enter/Answer-Back Button: 1
Bluetooth 4.3 Headset Profile
Codec: MSBC using HFP (Hands Free Profile)
Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT
Headset Voltage: Maximum of ~+8dBu as set by firmware
Microphone Type: Electret and Dynamic, selectable in beltpack menu
Microphone Voltage: Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).
Dynamic Mic: -55dBu
Headset Limiter: Selectable from beltpack menu
Modulation: GFSK, TDMA frame 10ms Full and Long slot