Shure Beta 56A Microphone

SCHEDULE A DEMO TODAY

Related Products

BYFP ipCase for 12x PGA57/58 Wired Microphones

BYFP ipCase for 12x PGA57/58 Wired Microphones

$149.99

BYFP ipCase for Shure SM7B Broadcast Pack

BYFP ipCase for Shure SM7B Broadcast Pack

$349.99

BYFP ipCase for Beta 52A and Beta 91A Drum Microphone

BYFP ipCase for Beta 52A and Beta 91A Drum Microphone

$179.99

BYFP ipCase for Shure BETA 98AMP/C 3-Pack

BYFP ipCase for Shure BETA 98AMP/C 3-Pack

$169.99

The Shure Beta 56A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.

A built–in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom–toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.

FEATURES

• Tailored frequency response provides drums, amplified instruments, and horns with studio quality sound
• Built–in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
• Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off–axis sound
• Compact design reduces stage clutter
• Hardened steel mesh grille resists wear and abuse
• Neodymium magnet for high signal–to–noise ratio output
• Minimally affected by varying load impedance
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Legendary Shure quality and reliability

SPECIFICATIONS

Type: Dynamic (moving coil)
Frequency Response: 50 to 16,000 Hz
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa (2.8 mV); (1 Pa = 94 dB SPL)
Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector: Three-pin professional audio connector (male XLR type)
Case: Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille
Adjustable, Locking Stand Adapter: Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 thread
Net Weight: 468 grams (16.7 oz)

CONTENTS

(1) Shure Beta 56A Dynamic Microphone
(1) Microphone Pouch
(1) Cable Strap
(1) Operator's Instructions
(1) Shure Sticker