My shopping cart
Your cart is currently empty.
Continue ShoppingShure BLX14/CVL-H10 Lavalier Wireless System (Factory Re-Certified)
The ideal entry-level wireless microphone system for small venues, BLX offer professional quality sound with simple setup and an intuitive interface.
Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it's the most accessible way to own the stage.
Includes BLX4 wireless receiver, BLX1 bodypack transmitter, CVL lavalier microphone, power supply, lavalier clip, windscreens, and user guide.
Working Range | 91 m (300 ft) Line of Sight |
Audio Frequency Response | 50 to 15,000 Hz Note: Dependent on microphone type |
Total Harmonic Distortion Ref. ±33 kHz deviation w | 0.5%, typical |
Dynamic Range | 100 dB, A-weighted, typical |
Operating Temperature | -18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range. |
Polarity | Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output. |
BLX1 Audio Input Level gain | max: -16 dBV maximum, min (0 dB): +10 dBV maximum |
BLX1 Gain Adjustment Range | 26 dB |
BLX1 Input Impedance | 1 M Ohm |
BLX1 RF Transmitter Output | 10 mW, typical varies by region |
BLX1 Dimensions | 110 mm x 64 mm x 21 mm (H x W x D) |
BLX1 Weight | 75 g (2.6 oz.), without batteries |
BLX1 Housing Molded | ABS |
BLX1 Power Requirements | 2 LR6 AA batteries, 1.5 V, alkaline |
BLX1 Battery Life | up to 14 hours (alkaline) |
BLX4 Output Impedance | XLR connector: 200 Ohm, 6.35 mm (1/4") connector: 50 Ohm |
BLX4 Audio Output Level Ref. ±33 kHz deviation wit | XLR connector: --27 dBV (into 100 k Ohm load), 6.35 mm (1/4") connector: --13 dBV (into 100 k Ohm load) |
BLX4 RF Sensitivity | -105 dBm for 12 dB SINAD, typical |
BLX4 Image Rejection | >50 dB, typical |
BLX4 Dimensions | 40 mm X 188 mm X 103 mm (H x W x D) |
BLX4 Weight | 241 g (8.5 oz.) |
BLX4 Housing | Molded ABS |
BLX4 Power Requirements | 12--15 V DC @ 160 mA, supplied by external power supply |
CVL Type | Electret Condenser |
CVL Frequency Response | 50--20,000 Hz |
CVL Polar Pattern | Cardioid |
Sign up for our mailing list to receive new product alerts, special offers, and coupon codes.
© 2023 avBYFP | Powered by Shopify