1. Home
  2. Shure ULX-D Quad Channel Wireless Bodypack Microphone System

Shure ULX-D Quad Channel Wireless Bodypack Microphone System

  • $8,721.00
Zoom image

Shure ULX-D Quad Channel Wireless Bodypack Microphone System

  • $8,721.00

The Shure ULXD4Q Quad Channel Digital Wireless Receiver offers four channels of uncompromising audio quality, RF signal stability, and advanced setup features in a space-efficient single rack unit. Rugged yet lightweight and compact, the 1RU all-metal chassis houses four independent receivers, each with its own audio and RF meters, gain control, and XLR outputs that can be either direct or summed for flexible signal routing.

At only 7.6 pounds, the ULXD4Q offers space savings in the rack and cost savings when shipping. With RF cascade and two Ethernet ports, units can easily share RF signal and be networked together for simplified frequency coordination and deployment. For networked audio applications, Dante digital networking allows multiple channels of audio over a single Ethernet cable.

With the suite of features and benefits ULX-D® Digital Wireless Systems offer, the ULXD4Q is truly generations ahead of any other available receiver in its class, and brings a new level of performance and scale to professional sound reinforcement.

  • Four receivers in a rugged 1RU metal chassis with internal power supply
  • Individual gain controls, LED meters, and XLR outputs for each channel
  • Up to 64 MHz tuning range (region dependent)
  • Digital predictive switching diversity
  • High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters
  • RF cascade ports allow distribution of RF signal to another unit
  • Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync
  • Bodypack frequency diversity ensures uninterrupted audio for mission-critical applications
  • AES 256-bit encryption-enabled for secure transmission
  • Audio summing routes two or more audio channels to combinations of receiver outputs. Use each channel's gain adjustment to reach the desired mix.
  • Dante digital networked audio over Ethernet
  • Ethernet networking for streamlined frequency coordination and deployment across multiple receivers
  • Interference detection and alerts provided on both the receiver and WWB6
  • Up to 60 dB independently adjustable gain for each channel
  • Wireless Workbench® 6 (WWB6) software integration for advanced coordination, monitoring, and control
  • AMX/Crestron® control
  • Compatible with the AXT600 Axient® Spectrum Manager
  • Yamaha® device ID allows simplified channel patching on CL consoles
  • Intuitive front panel LCD menu and controls with lockout feature
  • Upgraded LCD with adjustable contrast and brightness
  • Audio and RF LED meters with peak indicator
  • Switchable mic/line output level
  • Remoteable 1/2 wave antennas
RF Carrier Frequency Range 470–534 MHz
Working Range 330 ft (100 m) line of sight
Image Rejection >70 dB, typical
RF Sensitivity -98 dBm at 0.0001 BER
Latency, Standard Mode 2.9 ms
Audio Frequency Response 20 – 20 kHz (+/-1 dB) Note: Dependent on microphone type
Total Harmonic Distortion <0.01%
Operating Temperature Range -18°C (0°F) to 50°C (122°F)
Gain Adjustment Range -18 to +42 dB in 1 dB steps (plus Mute setting)
Full Scale Output, XLR LINE setting: +18 dBV, MIC setting: -12 dBV
Power Requirements 100 to 240 V AC, 50-60 Hz, 0.32 A max
Shure RF Carrier Band G50
Full Scale Output, 1/4" +12 dBV
Latency, High Density Mode 3.2 ms
Dimensions, L x W x H 19.0" x 10.8" x 1.7" (482 mm x 274 mm x 44 mm)
Weight 7.6 lbs (3.45 kg), without antennas
Housing Steel; Extruded aluminum
Network Interface Dual Port Ethernet 1 Gbps
Network Addressing Capability DHCP or Manual IP address, with or without gateway
Audio Dynamic Range Analog Output: >120 dB, A-weighted
(1) Shure ULXD4Q Quad Digital Wireless Receiver
(2) 1/2 Wave Antenna
(1) Operator's Instructions
(1) Hardware Kit
(2) 2' BNC Cable
(2) BNC Bulkhead Adapter
(1) 3' Ethernet Cable
(1) IEC Power Cable

The ULXD1 is a wireless bodypack transmitter compatible with ULX-D Digital Wireless Systems.

With a rugged yet lightweight aluminum case, the ULXD1 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options for professional sound reinforcement applications.

  • AES 256-bit encryption for applications requiring secure data transmission
  • Proprietary Shure Gain Ranging optimizes the system's dynamic range for any input source, eliminating the need for transmitter gain adjustments
  • Optional Shure SB900 lithium-ion rechargeable battery provides over 11 hours of battery life, precision metering in hours and minutes, and zero memory effect
  • External charging contacts for docked charging (with the SBC200 Dual Docking Charger)
  • Backlit LCD with easy to navigate menu and controls
  • Rugged metal construction
  • Detachable 1/4 wave antenna
  • Frequency and power lockout
RF Carrier Frequency Range 470–534 MHz
Working Range 330 ft (100 m) line of sight
Image Rejection >70 dB, typical
RF Sensitivity -98 dBm at 0.0001 BER
Latency, Standard Mode 2.9 ms
Audio Frequency Response 20 – 20 kHz (+/-1 dB) Note: Dependent on microphone type
Total Harmonic Distortion <0.01%
Operating Temperature Range -18°C (0°F) to 50°C (122°F)
Gain Offset Range 0 – 21 dB (in 3 dB steps)
Antenna Type 1/4 wave detachable
Power 1 mW, 10 mW, 20 mW
Shure RF Carrier Band G50
Battery Runtime (@ 10 mW using Shure SB900A) <12 hours
Latency, High Density Mode 3.2 ms
Dimensions, L x W x H 3.4" x 2.6" x 0.9" (86 mm x 66 mm x 23 mm)
Weight 0.3 lbs (142g), without antennas
Housing Cast Aluminum
Battery Runtime (@ 10 mW using AA Alkaline) <11 hours
Audio Dynamic Range Analog Output: >120 dB, A-weighted
Audio Input Connector 4-Pin male mini connector (TA4M)
(1) Shure ULXD1-G50 Bodypack Transmitter
(1) Detachable 1/4 Antenna
(2) AA Batteries
(1) Zipper Bag
(1) Operator's Instructions

Related products