My shopping cart
Your cart is currently empty.
Continue Shopping
MADE iN THE USA
ipCase is designed, manufactured, assembled, and finished in Orange County, California
MILITARY GRADE
MIL-STD 810G design that is resistant to corrosion and impact damage.
WATER AND DUST PROOF
Molded of ultra high-strength polypropylene copolymer resin, the ipCase features a gasket-sealed, water and dust tight design for your peace of mind
LIFETIME WARRANTY
Fully warranted against defects in materials and craftsmanship for the life of the case to the original owner
Perfect Fit
Precision-measured for a flawless fit, this case cradles your item with meticulous perfection.
Padlock Loop
Padlock loop system, providing enhanced theft protection
Tracking
Most ipCases have been equipped with a slot where you can add your tracking device for your peace of mind
Perfect Grip
Featuring latches and handles designed to effortlessly serve you, never compromising on functionality or ease
The Shure Beta 91A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule, integrated preamplifier, and XLR connection, Beta 91A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The Beta 91A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure levels (SPL).
The Shure Beta 52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels.
The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.
Shure Beta 91A
- Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound,
- Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter,
- Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments,
- Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the “low-mid scoop” setting for a strong low frequency “punch” with plenty of higher frequency attack,
- Requires no external mounting or accessories for ease of use and storage,
- Furnished with zipper pouch
Shure Beta 52A
- Frequency response shaped specifically for kick drums and bass instruments
- Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Studio quality performance, even at extremely high sound pressure levels
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high signal–to–noise ratio output
- Low sensitivity to varying load impedance
- Legendary Shure quality and reliability
| Type | Electret Condenser |
| Frequency Response | 20 to 20,000 Hz |
| Polar Pattern | Half-cardioid (cardioid in hemisphere above mounting surface) |
| Type | Dynamic (moving coil) |
| Frequency Response | 20 to 10,000 Hz |
| Polar Pattern | Supercardioid, rotationally symmetrical about microphone axis |
| Output Level | Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPL |
| Impedance | Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z |
| Phasing | Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 |
| Maximum SPL | 174 dB at 1000 Hz (calculated) |
| Connector | Three-pin professional audio connector (male XLR type) |
| Case | Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille |
| Adjustable, Locking Stand Adapter | Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread |
| Net Weight | 605 grams (21.6 oz) |
(1) Shure BETA 91A Condenser Microphone
(1) Shure BETA 52A Dynamic Microphone
(1) BYFP Case
(1) Operator's Instructions
(1) Shure BETA 52A Dynamic Microphone
(1) BYFP Case
(1) Operator's Instructions
More ipCases
Microphone
Video
DJ
Speaker
Lighting
Mixer
Control
Utility
